High Temperature Delayed Release Fracturing Encap or Encapsulate Gel Breaker

Annie Chemie P Ltd is engaged in manufacture of High Temperature Slow Delayed Release Fracturing Gel Breaker, Micro Encapsulate Coated Chemicals. We encapsulate dry Chemical crystals in a protective polymer coating to impart properties such as delayed release, temperature sensitive release, pressure sensitive release etc. We offer Encapsulated Gel Breaker (Ammonium Persulfate (APS) Sodium Bromate etc.) for hydraulic fracturing also called fracking. It is offered in three grades. Instant oxidizer, Delayed release low temperature oxidizer with and Delayed release high temperature oxidizer. We also offer Other delayed release chemicals.

High and Very High Temperature Encap or Encapsulate Gel Breaker Supplier for Fracturing

We offer controlled release temperature dependent material having specifications as under:

Specifications of HT Encap or Encapsulated Breaker based on Ammonium Persulfate are as under:
Active matter: Ammonium persulfate 75-80%
Coating: 16-23%. Higher or lower coating percentage is preferred depending on down-hole temperatures.
Mesh size: 25-40mesh
Release time: Does not release at room temperature and negligible release up to 50°C or 125°F. Releases slowly when temperature is increased to 65°C or 150°F. Almost all the active matter will be released in 18 hours at 65°C. The material can be designed to give quick or slow release.

Encap or Encapsulated Potassium Persulfate:
Active matter: Potassium persulfate 70%. Higher or lower coating percentage is preferred depending on down-hole temperatures.
Coating: 30%
Mesh size: 25-40mesh
Specific Gravity: Approximate 2

It is not active at lower temperatures up to 80°C. It slowly releases at higher temperature. It can be use when bottom hole temperatures are expected to be very high.

Coated or Encapsulate Potassium Persulfate based coated chemical to be active at 195F or 90C called high temperature delayed release gel breaker is used when significantly higher down-hole temperatures up to 300°F or 150°C are expected.
Coated or Encapsulated Sodium Bromate based gel breaker for very high temperatures. It will not be active up to 240°F or 115°C and is suggested for use at 280°F to 330°F or 138°C to 165°C.

Encapsulated Sodium Bromate:
Active matter: Encapsulated Sodium bromate 65%. Higher or lower coating percentage is preferred depending on down-hole temperatures.
Temperature dependent coating: 35%
Mesh size: 15-40mesh
Specific Gravity: Approximate 2.5
Release time: Does not release at room temperature and negligible release up to 115°C or 240°F. Releases slowly when temperature is increased to 280C or 330F. It is recommended for use when down-hole temperatures 280°F to 330°F or 138°C to 165°C expected.

Packaging:
50 lb pails, 1200 lbs per pallet.
55 lb pails (25kg), 1320 lbs per pallet.
55.1 (25kg) lb bags, 40bags per pallet or in super sacks, 1 per pallet.
Special pack sizes available upon request.

Deep Well Gel Breaker Manufacturers:

Annie Chemie P Ltd.
Offered from UAE, USA and India.
TELEPHONE: (OFFICE) 91-22-23770100, 23726950; FAX: 91-22-23728264
Between 5 Hour GMT to 12 Hour GMT

Exporters to USA Canada UAE Dubai Iraq Kuwait Russia Turkey Mexico Brazil Argentina Chile Peru South Africa Kenya Uganda Egypt Nigeria etc.